MIL-DTL-16036M(SH)
MIL-STD-46855
-
Human Engineering Requirements for Military Systems, Equipment, and
Facilities
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-470
- Designing and Developing Maintainable Products and Systems, Volume I
(Copies of these documents are available are available online at https://quicksearch.dla.mil/ or https://assist.dla.mil.)
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
CODE OF FEDERAL REGULATIONS
29 CFR1910
- Occupational Safety and Health Standards
(Copies of this document are available from the Superintendent of Documents, U.S. Government Printing Office,
Washington, DC 20401 or online at www.gpoaccess.gov/index.html.)
DEFENSE STANDARDIZATION PROGRAM OFFICE
SD-18
-
Defense Standardization Program Guide for Part Requirements and Application
(Copies of this document are available from https://www.navsea.navy.mil/nswc/crane/sd18/default.aspx or to obtain a
CD-ROM, send requests to Commander, Naval Surface Warfare Center Crane Division, ATTN: Code 6056, Mr.
Dan Quearry, Building 3334, 300 Highway 361, Crane, IN 45722-5001.)
MILITARY STANDARD DRAWINGS
MS17831
-
Bus Disconnect Quick Opening Symbol 1484
MS17832
-
Operating Wrench, Bus Disconnect Symbol 1485
(Copies of these documents are available online at https://quicksearch.dla.mil/ or https://assist.dla.mil.)
NAVAL SEA SYSTEMS COMMAND (NAVSEA) PUBLICATIONS
S9074-AR-GIB-010/278
-
Requirements for Fabrication Welding and Inspection, and Casting
Inspection and Repair for Machinery, Piping, and Pressure Vessels
S9074-AQ-GIB-010/248
-
Requirements for Welding and Brazing Procedure and Performance
Qualification
S9086-CJ-STM-010
-
NSTM Chapter 075, Fasteners
(Copies of these documents are available online at https://nll1.ahf.nmci.navy.mil. These publications can be located
by searching the Navy Publications Index for the TMIN without the suffix.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
ASME INTERNATIONAL
ASME Y14.38
-
Abbreviations and Acronyms for Use on Drawings and Related Documents
(Copies of this document are available from ASME International, 22 Law Drive, P.O. Box 2900, Fairfield, NJ
07007-2900 or online at www.asme.org.)
ASTM INTERNATIONAL
ASTM A131/A131M
-
Standard Specification for Structural Steel for Ships
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business