MIL-PRF-24021K
3.9.2 Warranty marking. Power monitors shall contain a warranty marking in accordance with
MIL-STD-130 or equivalent, and shall include the following additional information:
Warranty Expiration Date: _______________________
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified
as follows:
a. Qualification inspection (see 4.2).
b. Conformance inspection (see 4.3).
4.2 Qualification inspection. Qualification inspection shall be performed at a laboratory
acceptable to the Government (see 6.3).
4.2.1 Qualification samples. The qualification samples shall consist of four identical monitors
produced in accordance with this specification using production equipment and procedures.
Qualification samples shall meet the examinations and tests in accordance with
table IV and the conformance inspections of table V.
4.2.2 Qualification inspections and tests. Qualification inspections and tests shall be in the
order listed in table IV. Any or all qualification inspections and tests required for any one of the
qualification samples (tests listed under sample number 1, 2, 3, or 4 of table IV) may be conducted
on any of the samples.
4.2.3 Qualification verification. Sampling of production monitors shall be used to verify
requirements of this specification. Samples shall meet the examinations and tests in accordance
with table IV. The number of samples will be as shown in the production contract.
4.3 Conformance inspection. Each electric power monitor produced under a contract
requiring qualification to this specification will be accepted if:
a. The conformance inspections of table V are conducted by the supplier and are successfully
completed.
b. Installation instructions are securely attached to each monitor in such a way that they need
not be removed for check-out of the component prior to its installation on the aircraft.
4.4 Inspections. For the following inspections, the monitor shall be connected to a test circuit
conforming to figure 5, 6, or 7.
12
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business