MIL-DTL-2212 Contactors And Controllers, Electric Motor Ac Or Dc, And Associated Switching DevicesThis specification covers alternating current \(AC\) and direct current \(DC\) motor controllers, contactors \(see 6.8.6\), and associated switching devices \(see 6.8.3\). Included are magnetic controllers, controller parts \(see 6.8.52\), limit switches \(see 6.8.90\), pressure switches \(see 6.8.92\), temperature switches \(see 6.8.95\), selector switches \(see 6.8.94\), push-buttons \(see 6.8.57\), and similar devices used for control of electric motors \(see 6.8.19\). Semiconductor \(solid-state\) devices used as parts for magnetic controllers are included.

Pages 1 - - 2 - 3 - 4 - 5 - 6 - 7 - 8|||9 - 10 - 11 - 12|||

MIL-DTL-2212K(SH)

MIL-STD-461

Interface Standard for Requirements for the Control of Electromagnetic

Interference Characteristics of Subsystems and Equipment

MIL-STD-740-2

Structureborne Vibratory Acceleration Measurements and Acceptance Criteria

of Shipboard Equipment

DOD-STD-1399-70-1

Interface Standard for Shipboard Systems, Section 070 - Part 1, D.C. Magnetic

Field Environment (Metric)

MIL-STD-1399-300

Interface Standard for Shipboard Systems, Section 300B, Electric Power,

Alternating Current

MIL-STD-1474

Noise Limits

DEPARTMENT OF DEFENSE HANDBOOKS

MIL-HDBK-2036

Electronic Equipment Specifications, Preparation of

(Copies of these documents are available online at https://quicksearch.dla.mil/ or https://assist.dla.mil.)

2.2.2 Other Government documents, drawings, and publications. The following other Government documents,

drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,

the issues of these documents are those cited in the solicitation or contract.

NAVAL SEA SYSTEMS COMMAND (NAVSEA) DRAWINGS

804-1385850

Piping, Instrument Pressure for All Service

(Copies of this document are available from the applicable repositories listed in S0005-AE-PRO-010/EDM, which

can be obtained online at https://nll.ahf.nmci.navy.mil, requested by phone at 215-697-2626, or requested by email

at nllhelpdesk@navy.mil. Copies of this document may also be obtained from the Naval Ships Engineering

Drawing Repository (NSEDR) online at https://199.208.213.105/webjedmics/index.jsp. To request an NSEDR

account for drawing access, send an email to NNSY_JEDMICS_NSEDR_HELP_DESK@navy.mil.)

2.3 Non-Government publications. The following documents form a part of this document to the extent

specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or

contract.

ASTM INTERNATIONAL

ASTM F1836M

Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)

(Copies of this document are available from ASTM International, 100 Barr Harbor Dr., P.O. Box C700, West

Conshohocken, PA 19428-2959 or online at www.astm.org.)

INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS, INC. (IEEE)

IEEE C57.13

IEEE Standard Requirements for Instrument Transformers

(Copies of this document are available from the Institute of Electrical and Electronics Engineers, Inc., 445 Hoes

Lane, P.O. Box 1331, Piscataway, NJ 08855-1331 or online at www.ieee.org.)

NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)

NEMA ICS 1

Industrial Control and Systems: General Requirements

NEMA ICS 2

Industrial Control and Systems: Controllers, Contactors and Overload Relays

Rated 600 V