MIL-DTL-917 Electric Power Equipment, Basic Requirements ForThis specification covers the basic requirements applicable to the design, materials, and construction of naval shipboard electric power equipment \(exclusive of communication equipment, information technology \(IT\) equipment, and combat systems [fire control and weapons control equipment]\). Unless otherwise specified herein, the electric equipment developed for shipboard use under the requirements of this specification are limited to a maximum 450 volt \(V\) alternating current \(AC\) and a maximum 1,000 V direct current \(DC\). This equipment is intended for use on surface and submarine naval vessels \(see 6.2\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18

MIL-DTL-917F(SH)

2.2.2 Other Government documents, drawings, and publications. The following other Government documents,

drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,

the issues of these documents are those cited in the solicitation or contract.

DEFENSE TECHNICAL INFORMATION CENTER (DTIC)

DTIC AD 297457

United States Testing Company, Report of Test #83413

(Copies of this document are available online at www.dtic.mil.)

MILITARY STANDARD DRAWINGS

MS21208

Insert, Screw Thread, Coarse and Fine, Free Running, Helical Coil, CRES

MS21919

Clamp, Loop Type, Cushioned, Support

MS35335

Washer, Lock, Flat-External Tooth

(Copies of these documents are available online at https://quicksearch.dla.mil.)

NAVAL SEA SYSTEMS COMMAND (NAVSEA) PUBLICATIONS

0948-LP-045-7010

Material Control Standard (Non-nuclear), Volume 1

S6430-AE-TED-010

Piping Devices, Flexible Hose Assemblies, Volume 1

S9074-AR-GIB-010/278

Requirements for Fabrication Welding and Inspection, and Casting

Inspection and Repair Machinery, Piping and Pressure Vessel

S9086-CH-STM-010/074

NSTM Chapter 074, Welding and Allied Processes

S9086-CJ-STM-010/075

NSTM Chapter 075, Threaded Fasteners, User's Guide

S9086-RK-STM-010/505

NSTM Chapter 505, Piping Systems

S9505-AM-GYD-010

Technical Manual Description, Design, and Maintenance, Submarine

Fastening Criteria (Non-nuclear)

(Copies of these documents are available online at https://nll.ahf.nmci.navy.mil, requested by phone at 215-697-

2626, or requested by email at nllhelpdesk@navy.mil. These publications can be located by searching the Navy

Publications Index for the TMIN without the suffix.)

2.3 Non-Government publications. The following documents form a part of this document to the extent

specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or

contract.

AEROSPACE INDUSTRIES ASSOCIATION (AIA)

NASM3926

Knobs, Control (for use with Electronic, Communications, and Allied Equipment)

NASM8975

Fastener, Blind, High Strength, Installation Formed, CRES, Heat Resistant Steel and

Titanium, General Specification for

NASM17828

Nut, Self-Locking, Hexagon Regular-Height, (Non-Metallic Insert) 250 �F or 450

�F, Nickel-Copper Alloy

NASM17829

Nut, Self-Locking, Hexagon, Regular Height, 250 �F, Non-Metallic Insert, Non-

CRES Steel

NASM17830

Nut, Self-Locking, Hexagon-Regular, 250 �F and 450 �F, Non-Metallic Insert, 300

Series CRES

NASM20995

Wire, Safety or Lock