MIL-DTL-917F(SH)
This specification is approved for use by the Naval Sea Systems Command and is available for use by all
Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the basic requirements applicable to the design, materials, and
construction of naval shipboard electric power equipment (exclusive of communication equipment, information
technology (IT) equipment, and combat systems [fire control and weapons control equipment]). Unless otherwise
specified herein, the electric equipment developed for shipboard use under the requirements of this specification are
limited to a maximum 450 volt (V) alternating current (AC) and a maximum 1,000 V direct current (DC). This
equipment is intended for use on surface and submarine naval vessels (see 6.2).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
FF-S-86
-
Screw, Cap, Socket-Head
FF-S-92
-
Screw, Machine: Slotted, Cross-Recessed or Hexagon Head
FF-S-200
-
Setscrews: Hexagon Socket and Spline Socket, Headless
FF-S-210
-
Setscrews: Square Head (Inch) and Slotted Headless (Inch and Metric)
FF-W-84
-
Washer, Lock (Spring)
FF-W-92
-
Washer, Flat (Plain)
QQ-B-654
-
Brazing Alloys, Silver
TT-C-490
-
Chemical Conversion Coatings and Pretreatments for Metallic Substrates (Base for
Organic Coatings)
TT-P-645
-
Paint, Alkyd Type, Formula Number 84
W-C-596
-
Connector, Electrical, Power, General Specification for
W-C-596/12
-
Connector, Receptacle, Electrical, General Purpose, Duplex, General Grade and
Hospital Grade, Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz
W-C-596/13
-
Connector, Plug, Electrical, General Purpose, Hospital Grade, Grounding, 2 Pole, 3
Wire, 15 Amperes, 125 Volts, 50/60 Hertz
FEDERAL STANDARDS
FED-STD-H28/2
-
Screw-Thread Standards for Federal Services Section 2 Unified Inch Screw
Threads- UN and UNR Thread Forms
FED-STD-595/11120
-
Red, Gloss
1
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business